Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

--- blue-pill [2017/05/25 00:14] – [STM32duino bootloader] blazek
+++ blue-pill [2017/05/25 00:19] – [ST-LINK programátor] blazek
@@ Řádek 18: / Řádek 18: @@
 **Driver:** http://www.st.com/content/st_com/en/products/embedded-software/development-tool-software/stsw-link009.html
+===== STM32duino bootloader =====
+Flash bootloader přes ST-LINK na Windows.
+  - stáhnout bootloader https://github.com/rogerclarkmelbourne/STM32duino-bootloader/blob/master/STM32F1/binaries/generic_boot20_pc13.bin
+  - přesunout a přejmenovat do **C:\Users\**//user//**\Documents\Arduino\hardware\Arduino_STM32\tools\win\bootl.bin**
+  - v příkazovém řádku spustit **stlink\ST-LINK_CLI.exe -c SWD -P bootl.bin 0x8000000 -Rst -Run**
+<code>
+C:\...s\Arduino\hardware\Arduino_STM32\tools\win>stlink\ST-LINK_CLI.exe -c SWD -P bootl.bin 0x800000
+STM32 ST-LINK CLI v2.1.0
+STM32 ST-LINK Command Line Interface
+ST-LINK SN : Old ST-LINK firmware/ST-LINK already used
+ST-LINK Firmware version : V2J17S4 (Need Update)
+Old ST-LINK firmware detected!
+Please upgrade it from ST-LINK->'Firmware update' menu.
+Connected via SWD.
+Connection mode : Normal.
+Device ID:0x410
+Device flash Size : 64 Kbytes
+Device family :STM32F10xx Medium-density
+Loading file...
+Flash Programming:
+  File : bootl.bin
+  Address : 0x08000000
+Flash memory programming...
+██████████████████████████████████████████████████ 100%
+Flash memory programmed in 0s and 702ms.
+Programming Complete.
+MCU Reset.
+Could not run application while the read out protection is activated.
+A power cycle is needed.
+</code>
 ===== Arduino IDE =====