ESP32

Params

Wi-Fi
- 802.11b/g/n up to 150Mbps
- 4 MAC interfaces
- AMPDU
Bluetooth
- Supports BR/EDR/LE
- Supports both Class 1 and Class 2 Transmitter
CPU
- Xtensa LX6 dual-core up to 400 DMIPS
- Up to 600 DMIPS under 1.2V core-voltage
- Code size 15% smaller
- 6 Interrupt levels
Internal Data RAM
- 500kB, 200kB for users
Flash
- 4MB Instruction space
- Configurable Mapping Table for OTA
Internal LDO for external Flash
- 1.8V/3.3V
- Supports power-down Flash during deep-sleep
SD/eMMC/SDIO Host
- Support
SPI Controller
- 4
GPIO
- 32
UART
- 2 with DMA
LED PWM
- Hardware support, 16-channel,
- 20-bit timers running at the 80 MHz clock
- 13-bit accuracy @ 1kHz
- 15-bit accuracy @ 250Hz
Motor PWM, Pluse-counter
- Hardware
Remote Control
- Hardware support
Timer
- Two 32-bit timers and two 64-bit timers
- One 48-bit-RTC timer
Watchdog
- Two system watchdogs and one RTC watch dog
ADC
- 16-channel, 12-bit
- Supports Low Noise Analog Amplifier
DAC
- 2-channel, 10-bit
32k Crystal
- Support for sleep modes
Touch sensor
- Support, 10-channel
Temperature sensor
- Support
Flash Encrypt
- Hardware support
E-fuse
- 1kB, customer writeable, including four MAC addresses.
AES
- Supports AES-128, AES-192 and AES-256 of the standard FIPS PUB 197.
SHA
- Supports SHA-1, SHA-256, SHA-384 and SHA-512 of the standard FIPS PUB 180-4.
RSA
- Supports 512-bit to 4096-bit RSA encryption
Recovery memory in RTC
- 8 kBytes, instruction executable.
ULP-coprocessor
- Supports monitoring sensors in deep sleep.

Arduino IDE Win

https://github.com/espressif/arduino-esp32/blob/master/doc/windows.md
https://www.python.org/ftp/python/3.6.1/python-3.6.1-amd64.exe
https://www.arduino.cc/download_handler.php?f=/arduino-1.8.3-windows.zip

blazek@auriga MINGW64 ~
$ mkdir -p /c/Users/blazek/Documents/Arduino/hardware/espressif

blazek@auriga MINGW64 ~
$ cd /c/Users/blazek/Documents/Arduino/hardware/espressif

blazek@auriga MINGW64 ~/Documents/Arduino/hardware/espressif
$ git clone https://github.com/espressif/arduino-esp32.git esp32
Cloning into 'esp32'...
remote: Counting objects: 4622, done.
remote: Compressing objects: 100% (6/6), done.
remote: Total 4622 (delta 0), reused 4 (delta 0), pack-reused 4615
Receiving objects: 100% (4622/4622), 72.36 MiB | 2.10 MiB/s, done.
Resolving deltas: 100% (2314/2314), done.
Checking out files: 100% (1198/1198), done.

blazek@auriga MINGW64 ~/Documents/Arduino/hardware/espressif

blazek@auriga MINGW64 ~/Documents/Arduino/hardware/espressif
$ cd esp32/tools/

blazek@auriga MINGW64 ~/Documents/Arduino/hardware/espressif/esp32/tools (master)
$ /c/Python36/Scripts/pip.exe install requests
Collecting requests
  Downloading requests-2.18.1-py2.py3-none-any.whl (88kB)
Collecting idna<2.6,>=2.5 (from requests)
  Downloading idna-2.5-py2.py3-none-any.whl (55kB)
Collecting chardet<3.1.0,>=3.0.2 (from requests)
  Downloading chardet-3.0.4-py2.py3-none-any.whl (133kB)
Collecting certifi>=2017.4.17 (from requests)
  Downloading certifi-2017.4.17-py2.py3-none-any.whl (375kB)
Collecting urllib3<1.22,>=1.21.1 (from requests)
  Downloading urllib3-1.21.1-py2.py3-none-any.whl (131kB)
Installing collected packages: idna, chardet, certifi, urllib3, requests
Successfully installed certifi-2017.4.17 chardet-3.0.4 idna-2.5 requests-2.18.1 urllib3-1.21.1

blazek@auriga MINGW64 ~/Documents/Arduino/hardware/espressif/esp32/tools (maste)
$ /c/Python36/python.exe ./get.py
System: Windows, Info: Windows-7-6.1.7601-SP1
Platform: i686-mingw32
Downloading xtensa-esp32-elf-win32-1.22.0-61-gab8375a-5.2.0-2.zip

Done
Extracting xtensa-esp32-elf-win32-1.22.0-61-gab8375a-5.2.0-2.zip
Downloading esptool-96698a3-windows.zip
Done
Extracting esptool-96698a3-windows.zip
Done