• https://espressif.com/en/
• http://nodemcu-build.com/

• 802.11 b/g/n
• Integrated low power 32-bit MCU
• Integrated 10-bit ADC
• Integrated TCP/IP protocol stack
• Integrated TR switch, balun, LNA, power amplifier and matching network
• Integrated PLL, regulators, and power management units
• Supports antenna diversity
• WiFi 2.4 GHz, support WPA/WPA2
• Support STA/AP/STA+AP operation modes
• Support Smart Link Function for both Android and iOS devices
• SDIO 2.0, (H) SPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
• STBC, 1×1 MIMO, 2×1 MIMO
• A-MPDU & A-MSDU aggregation & 0.4s guard interval
• Deep sleep power <10uA, Power down leakage current < 5uA
• Wake up and transmit packets in < 2ms
• Standby power consumption of < 1.0mW (DTIM3)
• +20 dBm output power in 802.11b mode
• Operating temperature range -40C ~ 125C
• FCC, CE, TELEC, WiFi Alliance, and SRRC certified

• Soubor → Vlastnosti: Additional Boards Manager URLs
• http://arduino.esp8266.com/stable/package_esp8266com_index.json

• https://github.com/nodemcu/nodemcu-flasher
• https://github.com/marcelstoer/nodemcu-pyflasher (alternativa)

shell$ git clone https://github.com/nodemcu/nodemcu-flasher.git

• https://nodemcu-build.com/
• https://nodemcu.readthedocs.io/en/master/en/flash/
• https://nodemcu-build.com/faq.php#support

Vyplnit e-mail, kam přijdou odkazy ke stažení buildu NodeMCU. Dále vybrat moduly, které chceme mít ve zkompilovaném balíčku a potvrdit.